The selection guide comes
from SpecCheck.
An adapter with long upper and lower legs for use with non-bevelled cutting edges. Uniquely formed with grooves for use with S1 shroud. The shroud is held in place mechanically, meaning that no welding or bolting is required.
A 1 1/2 top leg adapter. Designed for both general and tough types of ground conditions.
A 1 1/2 bottom leg adapter. Designed for both general and tough excavation in different types of ground.
A bottom leg adapter with a short upper leg which only covers the bevel of the cutting edge.
Good penetration and excellent wear resistance from a traditional, chisel shaped tooth. Widely used for general excavation in tough conditions.
Converts a bucket with teeth into a straight-edged cleaning bucket. Ideal for backfilling and cleaning.
The tooth for maximum penetration. Makes light work of hard surface layers and frozen ground.
Maximum wear resistance in highly abrasive ground - particulary suitable where extra wear material is a top priority
Used primarily in a corner position in combination with T7, this tooth provides the penetration demanded by hard surfaces.
In both general and highly abrasive environments. This all-round tooth is popular for its excellent penetration.
Can in some cases also be used with excavators.
Maximum penetration from a conventionally shaped tooth – perfect for general excavation.
An extra-wide tooth for excavating and cleaning – penetration and straight-edge performance from a single solution.
A tooth that combines good penetration with excellent wear resistance. Ideal for general excavation in tough conditions.
A penetration tooth with added wear material. This tooth combines penetration and durability for optimal performance in blasted material and rocks.
Self-sharpening tooth with outstanding wear resistance – particularly suitable for quarries that present highly abrasive ground conditions.
This shroud can be cut to length and used with adapter A5. The cutting edge is protected and penetration remains unaffected.
Cut the shroud into suitable length to fit between the adapters.
Used to protect the cutting edge between the adapters, this shroud can be welded or bolted in place.
Cut the shroud into suitable length to fit between the adapters.
This shroud can be cut to length and mounted between adapters. Mounting is by welding to the cutting edge (especially recommended for XHD applications) or mechanical attachment to the adapters. In the latter case, supports (16205 and 16206) must be welded to the shroud.
Cut the shroud into suitable length to fit between the adapters.
Resetting teeth is made easy with this secure, simple locking device. Consists of forged steel profiles and vulcanised rubber core. The locking centralises in the adaptor.
Tool for driving in and out the locking devices. Simplifies teeth exchange and is recommended for safety reasons.
A heat resistant locking device. A heat resistant locking device which is recommended when working in temperatures constantly above +80°C.
